The DM3.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch (DM3.0S).
The wide super cardioid polar pattern minimizes feedback problems and effectively rejects signals not originating directly in front of the mic capsule, resulting in a warm and natural response for nearly every type of voice. The DM3.0 and DM 3.0S are engineered to handle very high levels of gain without distortion and will provide over 20dB of off axis feedback rejection. Low impedance and balanced output allow interference free performance even with long cable runs.
The DM3.0 & DM3.0S are built with a solid cast zinc alloy body, steel mesh grille ball and internal pop screen. The special shock mounting allows movement of the mic element and greatly reduces any handling noise.
The DM3.0 and DM3.0S are available either as a single mic, or as a pack of three microphones. The single pack contains one microphone with stand adaptor as well as a 4.5meter XLR-XLR cable. The pack of microphones is supplied in a hard wearing carry case and contains three microphones with stand adaptors and screws.
- FREQUENCY RESPONSE: 50Hz -18KHz
- Weight: 300grams
- OUTPUT IMPEDANCE: 250ohms
- Transducer Type: Dynamic
- Polar Pattern: Supercardioid
- Sensitivity: -54db (OdB=1V/Pa)
- Off axis rejection: >25dB at125 degree
- Maximum SPL: >135dB
- Cable/Connector: 3 pin gold plated
- Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
- Housing: Zinc alloy
- On/Off Switch: DM3.0S