Ampeg Classic Micro-CL Stack 100W 2x10" Bass Amplifier & Cabinet

MPN
99-015-1205
Current price: Current price: $429.99

18 MONTH SPECIAL FINANCING*

Offer available through 4/30/23.
In stock, only 2 left!
SKU
AMP-MICROCL
Ampeg Classic Series 100 Watt Bass Amplifier Head Unit with 100 Watt 2x10" Speaker Cabinet

Let's face it: you're the type who would happily crank up a full Ampeg SVT stack in your living room. Heck, who needs neighbors, anyway? And noise violations are really just a badge of honor, right...? For the rest of us, there's Ampeg Micro-CL Stack, delivering 100 watts of Ampeg tone into any situation. It's perfect for those just getting into Ampeg tone or for the seasoned bassist looking to practice in far-flung locations, like the master bathroom. Micro-CL Stack features a tough, 2×10" cab and tools like stereo input and output for silent practice, an effects loop and a direct out for recording. It's everything you want in a full stack, micro-sized to fit perfectly into your life.

  • Amplifier head
    • 100W power output at 8 Ω
    • Entirely solid state design
    • 1/8" external audio input works with 1/8" headphone output
    • Unbalanced line output
    • Effects loop with separate send and return jacks
    • 3-band EQ
    • Dual inputs: 0dB and –15dB
  • Speaker cabinet
    • 100W power handling at 8 Ω
    • 2 × 10" LF drivers
    • Frequency response: 57 Hz – 5 kHz
    • Sensitivity: 100 dB SPL @ 1W/1m
 
illustration of 3-band EQ knobs on Ampeg Micro-CL Stack

3-band EQ
Use these familiar controls to dial in your perfect tone. Rotate the midrange control counter-clockwise for a 'contoured,' more distant sound or clockwise for a sound that really cuts through.

illustration of dual input connectors on Ampeg Micro-CL Stack

Dual inputs
The -15dB input is suited for use with basses that have active electronics or high-output pickups. It will reduce the chance of overdriving the preamplifier stage, and allow more usable range and fine adjustment of the gain control. Use the 0dB input with passive instruments.

illustration of dual input connectors on Ampeg Micro-CL Stack
illustration of external audio input and headphone output connectors on Ampeg Micro-CL Stack

Audio input and headphone output
Connect the audio output from line-level sources such a mobile device or CD/MP3 player to the 1/8" stereo input. The incoming audio is mixed with the preamp signals so you can play along to a practice track as you listen with headphones. (Incoming audio only plays through the headphone output.)

illustration of effects loop input and output connectors on Ampeg Micro-CL Stack

Effects loop
Use the 1/4" TS output to send a line-level signal to an external effects processor. The output here is affected by all controls except the volume and limiter switch. Use the 1/4" loop return jack to feed the processed signal back into the power amplifier.

illustration of effects loop input and output connectors on Ampeg Micro-CL Stack
illustration of unbalanced line output connector on Ampeg Micro-CL Stack

Unbalanced line output
Connect this output to the input of a mixer or recording audio interface to avoid having to mic the speaker cabinet. The output is not affected by the master volume control. This output can also connect to external power amplifiers or powered loudspeakers as long as they have their own input controls to adjust the volume level.

More Information
SKU AMP-MICROCL
MPN 99-015-1205
Manufacturer Ampeg
Condition New
Included from Manufacturer Power cable
Amplifier Type Solid State
Amplifier Format Combo
Amplifier Application Bass
Power 100 watts
Speakers 2 × 10" LF drivers
Channels 1
Audio Inputs 1/4" 0dB mono main input
1/4" -15dB mono main input
1/8" stereo external audio input
1/4" mono effects loop return input
Audio Outputs 1/4" mono speaker outputs rated at 100 watts into 8 ohms
1/4" unbalanced direct output
1/8" stereo headphone output
1/4" mono effects loop output
EQ 3-band EQ
Bass knob
Mid knob
Treble knob
Effects Loop Yes
Height Head: 7"
Cabinet: 13"
Width Head: 12.2"
Cabinet: 24"
Depth Head: 10"
Cabinet: 11"
Product Weight Head: 13.8 lb
Cabinet: 33.2 lb

Ampeg Warranty

2-year electronics, 2-year speakers, nontransferable

90-day tubes and foot switches

Ampeg product owners do not have to actively register their products. When the product is purchased, it is automatically registered with Yamaha Guitar Group, Inc. (Ampeg's parent company). The original receipt / proof of purchase then qualifies as the official warranty card.

  • Ground shipping is FREE for all orders $99 and up.
  • Our central, midwest location ensures fast delivery times.
  • See below for transit day estimates. Please note, these are estimates and are not guaranteed.

Generally, package estimated transit days are as follows:

  • Upper Midwest: 1-3 days
  • Central US, South East US, and East Coast: 2-4 days
  • West Central US: 3-5 days
  • West Coast: 4-6 days
  • Alaska & Hawaii: 7+ days
All transit times are based in business days. Please allow 7-10 business days for most freight shipments. Business days are Monday through Friday and do not include public holidays and weekends (Saturday/Sunday.) For questions regarding estimates to your specific location, please contact us at [email protected] or 800-783-3368.

LEARN MORE