Line 6 HX Stomp XL Multi-Effects Processor
Line 6 HX Stomp XL is a professional-grade amp and effects processor that delivers HXTM modeling in a performance-ready pedal with eight capacitive-touch footswitches. The same SHARC DSP chip found in flagship Helix products enables HX Stomp XL pedal to run up to eight processing blocks simultaneously. Assignable footswitches let you access and control those blocks in powerful ways, making it flexible enough for use in nearly any application.
- The power of HX Stomp, now with eight footswitches
- Exceptional sound quality with 123dB of dynamic range
- Features the same SHARC DSP chip and HX Modeling as Line 6 Helix processors
- Eight capacitive-touch footswitches with color-coded LED rings
- More than 300 HX and legacy amps, cabs and effects – up to 8 simultaneous
- Supports third-party impulse responses (IRs)
- World-class polyphonic pitch-shifting effects
- Split/parallel signal paths for maximum routing flexibility
- Dual expression pedal / footswitch input for greater creative control
- Stereo effects loop: mono/stereo TRS send + stereo returns
HX Stomp XL comes loaded with more than 300 amps, cabs and effects, including world-class polyphonic pitch-shifting effects. 128 factory presets include vintage and modern sounds, and there are also presets created specifically for bass players as well as individual bass amp and cab models.
Additional features include a choice of true bypass or DSP bypass with trails, a stereo effects loop to integrate external devices or employ the '4-cable method,' a jack for two external footswitches or an expression pedal, third-party IR support and a multichannel 24-bit/96kHz USB audio interface. The free HX Edit app lets you create, save and load presets and customize nearly all pedal parameters. It's also a preset librarian, IR loader and more.
The power of eight
Line 6 HX Stomp was already the leading device in its class, but with five additional footswitches, HX Stomp XL greatly expands its realtime performance capabilities. Use HX Stomp XL as a 'super stompbox,' a backup or travel rig, an add-on tone expander with other modelers, a professional-quality audio interface or even a complete guitar or bass rig. The HX Stomp XL processor's Command Center functionality, MIDI capabilities, and external expression pedal jack also make it an ideal master controller for your entire setup.
HX modeling digitally mirrors the circuitry of analog amps and effects, component by component. Every model sounds and feels realistic, including such notoriously hard-to-model devices as vintage fuzz and modulation effects. Simply put, HX Stomp XL nails the analog vibe.
Despite its compact size, HX Stomp XL is easy to use thanks to its simple but powerful controls, color LCD and eight capacitive-touch footswitches with color-coded LED rings.
Pristine audio quaility
An industry-leading 123dB of dynamic range provides tremendous depth and ultra-low noise. High-quality components guarantee unadulterated audio from inputs to outputs, whether feeding an amp or powered speaker, going direct to FOH or recording in a professional or home studio.
Highly configurable I/O permits such routing schemes as simultaneously feeding an amp and a FOH mixer, employing the '4-cable method' and re-amping in the studio. External control via MIDI and/or an optional expression pedal or footswitch provides additional flexibility.
|Included from Manufacturer||USB cable
4 stick-on rubber feet
|Effects||Amp, cabinet and microphone models
|Patches / Programs||300+|
|Audio Inputs||Dual stereo 1/4" input
Dual stereo 1/4" return/aux input
|Audio Outputs||Dual stereo 1/4" output
1/4" stereo send output
1/4" stereo headphone output
|Pedal Switches||8 × capacitive, touch-sensitive footswitches with colored LED rings|
|On-Board Expression Pedal||No|
|Control Connections||1/4" dual expression pedal / footswitch input
Use 1/4" TRS male to to dual 1/4" TS female Y-cable (sold separately) to connect two pedals
|USB Functionality||File Transfer/Storage, Editor/Librarian, Recording Interface|
|Power Adaptor||DC-3 power supply (included)|
Line 6 Limited Warranty
Please be aware that your warranty is only valid in the region where you purchased your unit. For instance, if you buy your unit in Germany, then you must have the unit serviced in Germany, or within that region. If you live in South America, you will be interacting with the distributor for the country that you live in. It is for this reason that Line 6 recommends that you always buy your unit locally.
You will need to present your original, dated proof of purchase to have any warranty work performed at any Line 6 Authorized Service Center for repair.
General Warranty Periods
36 month parts and labor warranty:
12 month parts and labor warranty:
All amplifiers, including speakers
Helix family of products (extended warranty details below)
AMPLIFi family of products
Firehawk family of products
BackTrack/BackTrack + Mic
FBV Controller pedals
POD units (except Pocket Pod and Pocket Pod Express)
Line 6 Branded Wireless Products
Stompbox modeler pedals
ToneCore Pedals (Module AND Dock purchased together as one unit)
Variax instruments (one-year parts and labor for electronics and a limited lifetime warranty on wood)
90 days parts and labor warranty:
MIDI Mobilizer I/II
Mobile Keys 25/49
Pocket POD and Pocket POD Express
ToneCore Docks (purchased individually)
ToneCore Modules (purchased individually)
POD Studio GX, UX1, UX2 and KB37
Variax Workbench Interface
All Power Amp and Preamp Tubes
Any refurbished (B-Stock) Line 6 product
90 day warranty:
EX-1 Expression Pedal
All Line 6-Branded Accessories that are purchased separately, including power supplies, amp covers, custom carry bags
30 day return period:
Add-on software licenses (except iLok)
Helix Extended Warranty
Customers who purchased a Helix Floor, Helix Rack, or Helix LT processor, or a Helix Control pedal in the United States and have a copy of the original purchase receipt qualify for the extended warranty. Customers who qualify will have a second year added to their current one-year Helix Warranty at no cost upon registration.
Registration is required within one year of the purchase date. You already qualify if you've registered your Helix and have a copy of the original purchase receipt. Otherwise, register your product at the Line 6 website and make sure you have a copy of the original purchase receipt.
Line 6 warranties transfer from one end user to another within the original warranty period (as long as the user has the original dated proof of purchase), but not when purchased second hand from a retail outlet.
If you purchase a Line 6 product sold as new from an authorized Line 6 retailer with an online storefront, the standard warranty applies as if it were purchased in a physical store. If you purchase a used unit from an individual on eBay, you do so at your own risk with no warranty offered by Line 6, unless the seller includes a copy of the original receipt to transfer the warranty to you.
The only way to redeem warranty on a used item is to have the original purchase receipt, dated within the product warranty period. So if you fail to get such a receipt, the manufacturers warranty will not be honored.
The Warranty does not cover:
- Damage from physical abuse such as dropping the unit, impact from hard objects or damage to external components as a result of negligence.
- Damage due to liquid contamination.
- Damage resulting from any use other than that it was intended for.
- Any unit that has been repaired or had an attempted repair made to it by unauthorized personnel.
- Damage due to incorrect connection, connection to faulty equipment or connection to faulty or incorrect power supplies.
- Damage in transit as a result of inadequate packaging or protection.