Line 6 PowerCab 112
The Powercab 112 is a 1x12 active speaker system that delivers an authentic “amp-in-the-room” playing experience when paired with any modeler. When set to Flat mode, you simply plug your modeler in and play; Powercab 112 amplifies the sound of your presets as they are, much like a standard “FRFR” speaker system—but with the response and feel of an actual guitar amplifier.
Now imagine having an empty 1x12 speaker cabinet that you can instantly load with any one of six classic speaker types just by pressing a button. Setting the Powercab 112 to Speaker Modeling mode enables you to do just that—virtually—using a new technology developed by Line 6. Simply bypass the speaker cabinet models in your modeler’s signal chain and let Powercab 112 provide the sound and feel of playing through those classic speakers.
The Powercab 112 guitar speaker system accomplishes this by combining a clean 250-watt power amplifier with a custom hybrid coaxial speaker. The speaker combines the range, clarity, and power-handling capabilities of a P.A. speaker, with the rapid transient response of a guitar speaker, in just the right measure to function optimally in both Flat and Speaker Modeling modes. And Powercab 112 is loud, producing a room-filling 125dB SPL maximum volume.
In addition to sounding and responding like a true guitar cab, the Powercab 112 guitar speaker system also looks like one. Sturdily constructed of plywood, with a unique curved back that adds rigidity and decreases weight, Powercab 112 weighs a gig-friendly 35 pounds (16 kgs). And a flip-out kickstand allows it to be angled toward the performer, whether used in the backline or as a frontline monitor.
DESIGNED FOR GUITARISTS - INSIDE AND OUT
The Powercab 112 guitar speaker system for modelers looks, sounds, and responds like a professional guitar amplifier, because that is essentially what it is. In Flat Mode, Powercab 112 delivers a neutral frequency response from 70Hz to 20kHz with plenty of headroom. There is no need to adjust your modeler’s settings—your presets will sound just the way you expect them to. But what most clearly differentiates the Powercab 112 from other products is Speaker Modeling.
The sound of great amplifiers is due to the speaker as much as from the other components, yet until now no one has modeled an actual speaker driver alone, independently from the cabinet it happens to be loaded into. Line 6 has done just that by creating models of six classic and boutique speakers which drive a custom-designed hybrid coaxial loudspeaker. A lightweight cone and high-temperature 2" voice coil deliver the punch and dynamic response you expect from a guitar speaker, along with the wide range of a P.A. speaker. This design adds unparalleled authenticity to the speaker models, and consequently the sound of your amp modeler, preamp, or even your stompbox amp-simulator.
BUILT FOR GIGGING
The Powercab 112 features a highly efficient 250-watt power amplifier capable of producing up to 125dB Peak SPL—enough volume to fill a small club or medium-sized venue. And Powercab 112 is constructed to withstand the rigors of the road, while also being compact and weighing a mere 35 pounds (16 kgs). There’s also an XLR output featuring optimized microphone emulation for direct connection to a P.A., and foldout kickstands facilitate angled backline placement or use as an angled floor monitor.
THE CONSUMMATE CAB FOR HELIX
Although Powercab 112 was engineered to deliver superb results with any modeler, it is the perfect sonic complement to Line 6 Helix® guitar processors, completing the chain—from guitar input to guitar speaker.
|Included from Manufacturer||IEC Power Cable|
|Amplifier Type||Digital Modeling|
|Amplifier Application||Electric Guitar|
|Speakers||12" custom-designed coaxial driver|
|Amp Models||Six classic guitar speaker models
|Audio Inputs||Combination 1/4"/XLR|
|EQ||80 Hz Low Cut Filter|
|Product Weight||34.9 lbs|
Line 6 Limited Warranty
Please be aware that your warranty is only valid in the region where you purchased your unit. For instance, if you buy your unit in Germany, then you must have the unit serviced in Germany, or within that region. If you live in South America, you will be interacting with the distributor for the country that you live in. It is for this reason that Line 6 recommends that you always buy your unit locally.
You will need to present your original, dated proof of purchase to have any warranty work performed at any Line 6 Authorized Service Center for repair.
General Warranty Periods
36 month parts and labor warranty:
12 month parts and labor warranty:
All amplifiers, including speakers
Helix family of products (extended warranty details below)
AMPLIFi family of products
Firehawk family of products
BackTrack/BackTrack + Mic
FBV Controller pedals
POD units (except Pocket Pod and Pocket Pod Express)
Line 6 Branded Wireless Products
Stompbox modeler pedals
ToneCore Pedals (Module AND Dock purchased together as one unit)
Variax instruments (one-year parts and labor for electronics and a limited lifetime warranty on wood)
90 days parts and labor warranty:
MIDI Mobilizer I/II
Mobile Keys 25/49
Pocket POD and Pocket POD Express
ToneCore Docks (purchased individually)
ToneCore Modules (purchased individually)
POD Studio GX, UX1, UX2 and KB37
Variax Workbench Interface
All Power Amp and Preamp Tubes
Any refurbished (B-Stock) Line 6 product
90 day warranty:
EX-1 Expression Pedal
All Line 6-Branded Accessories that are purchased separately, including power supplies, amp covers, custom carry bags
30 day return period:
Add-on software licenses (except iLok)
Helix Extended Warranty
Customers who purchased a Helix Floor, Helix Rack, or Helix LT processor, or a Helix Control pedal in the United States and have a copy of the original purchase receipt qualify for the extended warranty. Customers who qualify will have a second year added to their current one-year Helix Warranty at no cost upon registration.
Registration is required within one year of the purchase date. You already qualify if you've registered your Helix and have a copy of the original purchase receipt. Otherwise, register your product at the Line 6 website and make sure you have a copy of the original purchase receipt.
Line 6 warranties transfer from one end user to another within the original warranty period (as long as the user has the original dated proof of purchase), but not when purchased second hand from a retail outlet.
If you purchase a Line 6 product sold as new from an authorized Line 6 retailer with an online storefront, the standard warranty applies as if it were purchased in a physical store. If you purchase a used unit from an individual on eBay, you do so at your own risk with no warranty offered by Line 6, unless the seller includes a copy of the original receipt to transfer the warranty to you.
The only way to redeem warranty on a used item is to have the original purchase receipt, dated within the product warranty period. So if you fail to get such a receipt, the manufacturers warranty will not be honored.
The Warranty does not cover:
- Damage from physical abuse such as dropping the unit, impact from hard objects or damage to external components as a result of negligence.
- Damage due to liquid contamination.
- Damage resulting from any use other than that it was intended for.
- Any unit that has been repaired or had an attempted repair made to it by unauthorized personnel.
- Damage due to incorrect connection, connection to faulty equipment or connection to faulty or incorrect power supplies.
- Damage in transit as a result of inadequate packaging or protection.