Many will be drawn to Pro 3's promise as a eurorack modular master controller by virtue of its powerful sequencer, extensive mod matrix and four CV outputs, but it's definitely no slouch as a standalone mono/paraphonic synth: two VCOs, a wavetable oscillator and three distinct filter circuits combine to provide vast sound design potential right on board.
Team Member since 2012
What's included in this bundle:
Sequential Pro 3 is a 2-VCO + wavetable mono/paraphonic synth and a new benchmark for raw sonic power and unrivaled versatility. Pro 3 boasts 3 oscillators, 3 vintage filters, 3 LFOs, 4 loopable envelopes, a massive 32-slot mod matrix and a 16×16×4 sequencer. Throw in dual digital effects and 4 control voltage ins and outs and you've got a hugely powerful instrument that's as exciting to program as it is to play. This Special Edition model has a tilt-up control panel and premium-grade walnut trim.
This dual 1/4" cable is designed to connect your instrument to any unit with right and left channels. Great for keyboards, mixing consoles, PA systems, or other sound reinforcement or recording applications.
This cable is designed to interconnect pro audio gear with unbalanced 1/4" phone jacks.
This convenient dual cable carries both MIDI in and out signals.
This standard cable is designed to interconnect MIDI devices.
A 36" red patch cord, 3.5mm / 1/8" mono for eurorack modular synthesizers.
A 36" green patch cord, 3.5mm / 1/8" mono for eurorack modular synthesizers.
This cable is designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, USB capable electronic instrument, or many computer peripherals to a Mac or PC.
Sequential's Pro 1 and Pro 2 mono synths achieved nearly legendary status in their time, so it was only natural that they build on their strengths with an even more worthy successor. Enter Sequential Pro 3, a 2-VCO + wavetable mono/paraphonic synth and a new benchmark for raw sonic power and unrivaled versatility.
The power of 3
Pro 3 boasts 3 oscillators, 3 vintage filters, 3 LFOs, 4 loopable envelopes, a massive 32-slot mod matrix and a 16×16×4 sequencer. Throw in dual digital effects and 4 control voltage ins and outs and you've got a hugely powerful instrument that's as exciting to program as it is to play.
A next-generation classic
Pro 3 is a hybrid of solid, old school analog synthesis paired with versatile digital technology. Its 2 voltage-controlled oscillators provide warmth and presence, while its 3rd wavetable oscillator provides digital edge and grit. With 32 tables of 16 waves each and wave morphing, the tonal possibilities are immense. Tuned feedback with grunge and analog distortion deliver industrial-grade nastiness on demand.
Three filters based on vintage designs
At the heart of Pro 3's ballsy sound are its vintage-style filters. Filter 1 is a 4-pole lowpass design based on the Prophet-6 filter. Filter 2 is a classic transistor ladder filter with optional resonance compensation to preserve its low-end punch. Filter 3 is a classic 2-pole, state-variable design based on the OB-6 filter that can be continuously varied between low-pass, notch and high-pass operation with an optional band-pass mode. An additional drive control provides still more punch when you really want to get down and dirty.
Possibly Pro 3's most powerful performance tool is its sequencer. With 16 tracks, 16 steps and 4 phrases, it features both real-time and step input, ratcheting, variable gate and sequence lengths, multiple playback modes and paraphonic operation. It also syncs to MIDI clock and external audio input and inputs/outputs control voltages. In addition to notes, sequence tracks can control any parameter in the 132-destination modulation matrix.
Plays well with modulars
Pro 3's flexible architecture opens the door not only to processing external audio, but also to interfacing with modular synths through its 4 rear-panel control voltage inputs/outputs and a dedicated gate output. Control voltages can be assigned and routed from within the modulation matrix and can run at audio rates for extreme modulation effects. Some of the many parameters that can be sent to the CV outputs include oscillators, LFOs, envelopes and sequencer tracks, allowing Pro 3 to become the central hub of a modular or multi-synth setup.
Effects, envelopes, LFOs, an arpeggiator and extreme modulation
Pro 3's effects section provides delays, reverbs, time-domain effects such as chorus/phasing/flanging and more. There are 4 loopable 5-stage envelope generators, 3 syncable LFOs with slew and phase offset, a full-featured arpeggiator and a 32-slot modulation matrix with dozens of modulation sources and over 100 destinations.
Monophonic and paraphonic operation
Pro 3 was designed to be a super-powerful monosynth, but it is also a versatile 3-voice paraphonic synth. This makes playing 3-note chords not only possible, but with creative use of effects and some per-oscillator modulation, mind-blowingly expressive.
Put all of this sonic power in a 3-octave, semi-weighted keyboard with velocity and channel aftertouch, add backlit pitch and mod wheels and a location-sensitive touch slider and you've got one of the most inspiring synths ever made.
|Included from Manufacturer||Power cord|
|Number of Keys||37|
|Key Action||Premium semi-weighted Fatar keybed with velocity and aftertouch|
|Programs/Presets||512 user programs
512 factory programs
Playlist mode allows creation of set lists
|Voices of Polyphony||3-voice paraphonic mode with individually-gated envelopes per oscillator|
|Oscillators per Voice||3|
|Effects||Tuned feedback with 'grunge' for extra-aggressive tonal destruction
Programmable analog distortion
|Sequencer||Advanced 16-track sequencer with 3 modes: normal, gated and trigger
16 tracks and 4 linkable 16-step phrases
Per-step ratcheting, duration and velocity
Forward, reverse, forward/reverse and random playback modes
|MIDI||In, Out, Thru, USB|
|USB Port (to Host)||MIDI|
|Audio Inputs||1/4" mono external audio input|
|Audio Outputs||Dual 1/4" stereo main output
1/4" stereo headphone output
|Control Connections||1/4" sustain/footswitch input
1/4" expression pedal input
(4) 1/8" CV inputs with -10V to +10V voltage range
(4) 1/8" CV outputs with -10V to +10V voltage range
(1) 1/8" gate output
|Onboard Controllers||Backlit pitch bend wheel
Backlit modulation wheel
Position-sensitive latchable touch slider
|Unique Features||Special Edition features tilt-up control panel and premium-grade walnut trim|
Dave Smith Instruments Limited Warranty
Dave Smith Instruments warrants that its products will be free from defects in materials and/or workmanship for one (1) year from the date of purchase.
Please register your product online at at the Dave Smith Instruments website to establish the date of purchase. This is not a requirement for warranty service, but it will help expedite the warranty service process.
Please contact a Dave Smith Instruments support representative to determine the best course of action for getting your product repaired. For your own protection, please do not return any product to Dave Smith Instruments without a return authorization (RA) number.
If you need to return your instrument for repair, you are responsible for getting it to Dave Smith Instruments. It is highly recommended that you insure your shipment and pack it in the original packaging. Damage resulting from shipping a product with insufficient packaging is not covered by this warranty.