What's included in this bundle:
Sensei Caswell: 'Our SEM is known as a 'Voltage-Controlled State Variable Filter' because it provides simultaneous highpass, lowpass and bandpass outputs, all with a 12 dB/oct slope.
A 12" blue patch cord, 3.5mm / 1/8" mono for Eurorack modular synthesizers.
A 12" green patch cord, 3.5mm / 1/8" mono for Eurorack modular synthesizers.
A 12" red patch cord, 3.5mm / 1/8" mono for Eurorack modular synthesizers.
A 12" yellow patch cord, 3.5mm / 1/8" mono for Eurorack modular synthesizers.
Studio Electronics SEM is known as a 'voltage-controlled state variable filter' because it provides simultaneous high pass, low pass and band pass outputs, all with a 12dB/octave slope. The notch is the inverse of the bandpass, achieved by summing the low pass and high pass outputs. This version is a combination of the original SEM filter and the newer design from the OBX, along with improvements by Studio Electronics. It has a modest current draw, evenly from the plus and minus rails.
Three attenuverter and four attenuation pots control the FREQUENCY, RESONANCE, FREQ CV 1, RESO CV, LP HP, INPUT and OUTPUT, delivering smooth, detailed and ever-variable expression.
Switch it up
FULL and HALF strength filter frequency keyboard/voltage tracking, and BP / LP-HP modes.
Patch it up
Seven patch points - 1 V/O, FREQ CV 1, FREQ CV 2, RESO CV, INPUT, BP LP-HP and OUTPUT - jack you in.
- Module controls
- FREQUENCY knob: adjusts the frequency (or 'cutoff') of the filter.
- RESONANCE knob: adjusts the resonance of the filter.
- FULL / HALF TRACK switch: switches between full and half keyboard/voltage tracking.
- FREQ CV 1 knob: frequency control voltage 1 input attenuverter.
- RESO CV knob: resonance control voltage input attenuverter.
- FREQ CV 2 knob: frequency control voltage 2 input attenuverter.
- INPUT knob: adjusts the audio input level.
- OUTPUT knob: adjusts the audio output level.
- Patch points
- 1 V/O input: one volt per octave control voltage input.
- FREQ CV 1 input: frequency control voltage 1 input.
- FREQ CV 2 input: frequency control voltage 2 input. Get tricky with the second attempt!
- RESO CV input: resonance control voltage input. Use for shimmers or howling wolf tones.
- LP HP: low pass / high pass attenuverter.
- INPUT: audio input.
- OUTPUT: audio output.
- Physical specifications
- Size: 12hp
- Module depth: 39.7mm (with ribbon cable attached)
- Power usage: 23mA @ +12V, 23mA @ -12V
|Included from Manufacturer|
|Depth||39.7mm (with ribbon cable attached)|
|Module Power Usage||23mA @ +12V
23mA @ -12V
|Unique Features||Simultaneous high pass, low pass and band pass outputs|
Studio Electronics / Analogia Inc. Limited Warranty
Studio Electronics / Analogia Inc. ('Analogia Inc.') warrants only to the original purchaser of this product from a Analogia Inc.-authorized reseller or distributor that this product will be free from defects in material and workmanship under normal use and service for one year after date of purchase.
Analogia Inc. reserves the right, before having any obligation under this limited warranty, to inspect the damaged Analogia Inc. product, and costs of shipping the Analogia Inc. product to Analogia Inc. for inspection shall be shared between purchaser and manufacturer: purchaser pays for shipping to Analogia Inc.; Analogia Inc. covers shipping costs back to purchaser.
In order to recover under this limited warranty, purchaser must make claim to Analogia Inc. within 30 days of occurrence of problem, and must present acceptable proof of original ownership: original receipt, warranty card registration, on-line registration, or other documentation Analogia Inc. deems acceptable. Analogia Inc., at its option, shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt/invoice as evidence of the original purchaser's date of purchase. You will need it for warranty service. In order to keep this limited warranty in effect, the product must have been handled and used as carefully prescribed in the instructions accompanying the product.
This limited warranty does not cover any damage due to accident, misuse, abuse or negligence, whether willful or otherwise. This limited warranty is valid only if the product is used with the equipment specified in said equipment's manual or on the product box. Please check product manual or product box for details. This limited warranty is non-transferable and does not apply to any purchaser who bought the product from a reseller or distributor not authorized by Analogia Inc., including but not limited to purchases from internet auction sites. This warranty does not affect any other legal rights you may have by operation of law.
Except for the limited warranty provided herein, to the extent permitted by law, Analogia Inc. disclaims all warranties, express or implied, including all warranties of merchantability and/or fitness for a particular purpose. To the extent that any implied warranties may nonetheless exist by operation of law, any such warranties are limited to the duration of this warranty. Some states/provinces do not allow limitations on duration of warranty, so the above limitations may not apply to you.Repair or replacement of this product, as provided herein, is your exclusive remedy. Analogia inc. shall not be liable for any special, incidental or consequential damages, including, but not limited to, lost revenues, lost profits, loss of use of software, loss or recovery of data, rental of replacement equipment, 'downtime,' damage to property, and third-party claims, arising out of any theory of recovery, including warranty, contract, statutory or tort. Notwithstanding the term of any limited warranty or any warranty implied by law, or in the event that any limited warranty fails of its essential purpose, in no event will Analogia Inc.'s entire liability exceed the purchase price of this product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province.
When you place an order with Kraft Music, a confirmation will be sent to you via email, with details of your order, including method of shipping. Once your order leaves our facility, you will receive a shipping confirmation via email, with carrier name and tracking number. Many of the products we sell are shipped in the manufacturer box. These boxes will often have images, model numbers, and other text that indicate the contents inside. If your purchase is a gift, please make proper shipping arrangements or contact us about possible packaging options.
Kraft Music is able to ship to the continental US, HI, AK and PR.