Yamaha AVENTAGE MX-A5200 11-Channel Power Amplifier
Supreme Power. Engineered to deliver on power and performance, this amplifier harnesses the best in power performance that drives from a technological engineering marvel. Featuring the highest quality in components for amplifiers, pair it with the CX-A5200 AV Preamplifier Processor for the ultimate theater experience.
- 150 W (8 ohm, 0.06% THD, 20Hz-20Hz, 2-ch driven)
- Yamaha engineered toroidal transformer and custom block capacitors
- Power amp with three-stage Darlington circuit
- Noise resistant XLR balanced connection
- Bi-amping channel selector
- Gold-plated speaker terminals
- Bridge-Tied Load (BTL) support
- Auto Power Standby
AVENTAGE Separates represent the ultimate in home entertainment and Yamaha establishes a new benchmark in performance and innovation with the CX-A5200 pre-amplifier and MX-A5200 power amplifier.
Power and Presence
The MX-A5200 offers 11 discrete channels of amplification with flexible configuration options, delivering an impressive combination of both high power and quality.
Enjoy the flexibility of a multi-zone system or immerse yourself in exhilarating surround sound using any combination of 11 channels
Ultimate Performance with BTL
To further enhance power capacity, the MX-A5200 supports a Bridge-Tied Load (BTL) configuration for the front two channels. This allows for quality in both sound fidelity and power to the front speakers.
As part of its uncompromising design, the MX-A5200 boasts a specially designed chassis to maximize rigidity and eliminate the effects of vibration.
The MX-A5200 employs a double bottom construction consisting of vibration control plates made of 1.6 mm steel, echoing that of the legendary Z11 AV receiver.
In order to support the heavy heat sinks and other components, a left-right independent construction strengthened by a rigid-frame structure is utilized. The bottom frame reduces the transmission of vibration produced by the large power supply transformer and heat sinks.
The MX-A5200 also incorporates a heavy insulator that blocks external vibration thus improving signal to noise ratios for an ultimate theater experience.
Precisely planned, circuit-routed and designed with a symmetrical power amplifier layout, the MX-A5200 achieves optimal channel separation with left and right sides being both physically and electrically isolated.
This design allows for an improvement in signal-to-noise ratio thus achieving an expansive sound stage and a quality output.
The MX-A5200 utilizes a high-output, large toroidal transformer combined with two specially developed high-capacity block capacitors to deliver massive power with generous headroom.
The rear of the MX-A5200 features high-quality, gold-plated terminals that are compatible with Y plugs (spade connectors) for optimal connections with speakers.
Heavy-Duty Bottom Plate
Stabilizing the chassis is the key to enhanced performance and sound. The MX-A5200 achieves this by employing a thick bottom plate which acts to steady the entire structure and achieve optimal sound.
Balanced XLR Connections
When connecting AV components, electrical noise can be introduced – a result of the connections between them and also from other sources of external noise.
The MX-A5200 utilizes balanced connections for all 11 channels, the same type found in professional audio and theater applications. This is to reduce electrical or any external noise.
Additionally, the alternative RCA unbalanced connections use a ground sensing transmission method that achieves simple balanced transmission
|Power||Rated Output Power (1kHz, 1ch driven): 230 W (6 ohm, 0.9% THD), 190 W (8 ohm, 0.9% THD)
Rated Output Power (1kHz, 2ch driven): 170 W (8 ohm, 0.9% THD)
|Audio Inputs||11 x XLR|
|Product Weight||58.2 lbs.|
Yamaha AVENTAGE Limited Warranty
Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America ('Yamaha') is proud of the experience and craftsmanship that goes into each and every Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer you, the Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from Yamaha's authorized dealers in the USA, including Puerto Rico (the 'Warranted Area') and (2) used exclusively in the Warranted Area. Yamaha suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized Yamaha dealer or Yamaha Customer Service if you have any questions.
This warranty covers RX-A AV Receivers, CX-A AV Pre-Amplifiers and MX-A Power Amplifiers against defects in materials or workmanship for three (3) years.
Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If Yamaha elects to replace the product, the replacement may be a reconditioned unit.
You will be responsible for any installation or removal charges and for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will pay the return shipping charges to any destination within the USA if the repairs are covered by the warranty.
This warranty does not cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions according to the Owner's Manual for this product; any shipment of the product (claims must be presented to the carrier); repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Service Center; (b) any unit which has been altered or on which the serial number has been defaced, modified or removed; (c) normal wear, battery or battery replacement and any periodic maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e) damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; (f) RFI/EMI (Interference/noise) caused by improper grounding or the improper use of either certified or uncertified equipment, if applicable; or (g) interference arising from the use of wireless communication devices (e.g. 2.4 gHz cordless telephones), or other radio frequency emitting products such as microwave ovens, whether such interference impairs the operation of the product or vice-versa. Consult the Owner's Manual for guidance on set-up procedures for minimizing the risks of interference.
Any evidence of alteration, erasing or forgery of proof-of- purchase documents will cause this warranty to be void. This warranty covers only the Original Owner and is not transferable.
Warranty service will only be provided for defective products within the Warranted Area. Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful, contact Yamaha directly. Yamaha may request that you send the defective product to a local authorized Yamaha Servicer or authorize return of the defective product to Yamaha for repair. For products requiring in-home service, contact your local authorized Yamaha dealer to arrange for service. If you are uncertain as to whether a dealer has been authorized by Yamaha, please contact Yamaha's Service Department or check Yamaha's website.
Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other dated, proof-of-purchase document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be found ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon receipt of payment or acceptable arrangement for payment.
Any implied warranties, including warranties of merchantability and fitness for a particular purpose shall be limited in duration to the applicable period of time set forth above. Yamaha shall not be responsible for incidental or consequential damages or for damages based upon inconvenience, loss of use, damage to any other equipment or other items at the site of use or interruption of performances or any consequences. Yamaha's liability for any defective product is limited to repair or replacement of the product, at Yamaha's option. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only express warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to assume for it any other express warranty.
When you place an order with Kraft Music, a confirmation will be sent to you via email, with details of your order, including method of shipping. Once your order leaves our facility, you will receive a shipping confirmation via email, with carrier name and tracking number. Many of the products we sell are shipped in the manufacturer box. These boxes will often have images, model numbers, and other text that indicate the contents inside. If your purchase is a gift, please make proper shipping arrangements or contact us about possible packaging options.
Kraft Music is able to ship to the continental US, HI, AK and PR.