TASCAM SERIES 208i 20 IN/8 OUT USB Audio/MIDI Interface

MPN
SERIES 208i
$499.99
OR

Available through 10/30/19. Equal monthly payments required for 36 months.

Special Offers
  • 35TH ANNIVERSARY SALES EVENT!
    Click HERE for details. Now through October 28th!
Hurry, Only 1 Left!
SKU
TAS-SERIES208I
Free Shipping
Product Support
Secure Payments
Additional Bundles
TASCAM 20 IN/8 OUT USB Audio and MIDI Interface

Expandability, both internal and bundled effects processing, internal mixing, external software control, and more for studio, home, and live recording. With a new look, including an angled tabletop design and large, easy-to-grab knobs, TASCAM sets a new standard for mid-grade audio interfaces.

Supreme Audio Fidelity
It all starts with the best sound: TEAC and TASCAM have more than 60 years of high grade audio design experience. TASCAM Ultra-HDDA (High Definition Discrete Amplifier) mic preamp circuitry guarantees transparent natural tone with ultra-low noise.

24-bit/192 kHz
A new-generation TASCAM audio interface engine delivers high-definition, 24-bit/192 kHz recording and solid stability.

Expandable input capability to grow into
Easily add more input channels to accommodate future growth by using external microphone preamplifiers with S/MUX optical inputs to record drums, guitars, keyboards, vocals, and more. Each S/MUX optical port can accept up to 8 channels of audio input from an ADAT- or S/MUX-compatible device.

Well-designed interface for quick production
TASCAM SERIES audio interfaces feature a large, easy-to-grab Monitor control knob that ensures you can quickly adjust the monitor output level. Their angled tabletop design offers easy access to all front-panel controls. A handy Monitor Balance control enables mixing live input with computer playback for zero-latency monitoring. Each analog input channel is served by an individually switched +48 volt phantom power supply for condenser microphones.

Dual headphone monitoring
The SERIES interface has 2 individual headphone amplifiers which offer powerful enough dual headphone monitoring.

Control Software for Matrix Mixing, Effects Processors, and More
Free, easy-to-use TASCAM Control software manages faders, processing, and the ability to route any audio input (analog, optical, and USB) to any audio output.

Built-in DSP Effects and Processing
A DSP input and output mixer is complemented with digital reverb, compressor, phase invert, and 4-band EQ for each channel. Having these processors included internally eliminates all latency issues and takes the load off the computer allowing the PC/Mac to process the audio more efficiently.

Mobility
TASCAM SERIES interfaces support tablets and other mobile devices and are compatible with many applications to meet your recording needs now and in the future.

Start Making Music Immediately with Bundled Software
TASCAM SERIES audio interfaces are bundled with world-class software. Record with Steinberg Cubase LE DAW for Windows and Mac computers and Steinberg Cubasis LE DAW for iPad. Then process your audio with IK Multimedia AmpliTube guitar/bass modeling and effects software. Finish your high-quality, polished recording projects with IK Multimedia T-RackS mastering software. Both free standing and plug-in versions of AmpliTube and T-RackS are included.

More Information
MPN SERIES 208i
Manufacturer TASCAM
Condition New
Channels 20 in, 8 out
Digital Conversion 192k Hz / 24-bit
Connectivity USB
Audio Inputs 4 x XLR / 1/4" Combo
Optical A
Optical B
Audio Outputs 8 x 1/4" Balanced Line Out
2 x 1/4" Stereo Headphone Outs
MIDI In, Out
ADAT Expandable Yes
EQ 4-band for each channel
Phantom Power +48v
Low-Latency Direct Monitoring Yes
Width 11.65"
Depth 2.56"
Height 6.30"
Product Weight 3.53 lbs.
Unique Features Word Clock

TASCAM/TEAC Limited Warranty

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is only valid within the country the unit was originally purchased.

Except as specified below, this warranty covers all defects in material and workmanship in this product. The following are not covered by the warranty:

  • Damage to or deterioration of the external cabinet.
  • Damage resulting from accident, misuse, abuse, or neglect.
  • Damage resulting from failure to perform basic daily maintenance and/or calibration, or otherwise resulting from failure to follow instructions contained in your owner's manual.
  • Damage occurring during shipment of the product (claims must be presented by the carrier).
  • Damage resulting from repair or attempted repair by anyone other than TEAC or an authorized TASCAM service station.
  • Damage resulting from causes other than product defects, including lack of technical skill, competence, or experience of the user.
  • Damage to any unit which has been altered or on which the serial number has been defaced, modified, or removed.

This warranty may be enforced only by the original purchaser.

All parts except heads and disk drives are warranted for one (1) year from the date of original purchase for products not used for commercial purposes. For products used commercially, the warranty is ninety (90) days for magnetic heads & optical pickups, one (1) year for other parts, & ninety (90) days for labor.

TASCAM will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.

Your unit must be serviced by an authorized TASCAM service station in the United States. (This warranty is not enforceable outside the U.S.) If you are unable to locate an authorized TASCAM service station in your area, please contact TASCAM. TASCAM either will refer you to an authorized service station or instruct you to return the unit to the factory.

Whenever warranty service is required, you must present both the original dated sales receipt and this warranty statement as proof of warranty coverage.

You must pay any shipping charges if it is necessary top ship the product for service. However, if the necessary repairs are covered by the warranty, we will pay return surface shipping charges to any destination within the United States.

Any implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.

TEAC's liability for any defective product is limited to repair or replacement of the product, at TEAC's option. TEAC shall not be liable for:

  • Damages bases upon inconvenience, loss of use of the product, loss of time, interrupted operation or commercial loss
  • Any other damages, whether incidental, consequential or otherwise

Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitations of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

Standard Shipping

When you place an order with Kraft Music, a confirmation will be sent to you via email, with details of your order, including method of shipping. Once your order leaves our facility, you will receive a shipping confirmation via email, with carrier name and tracking number. Many of the products we sell are shipped in the manufacturer box. These boxes will often have images, model numbers, and other text that indicate the contents inside. If your purchase is a gift, please make proper shipping arrangements or contact us about possible packaging options.

Kraft Music is able to ship to the continental US, HI, AK and PR.

UPS Ground Shipping at Kraft Music